solidspray.com

SSG-M2

High Performance Air Cooled Thermal Spray Gun
State-of-the-Art Stabilized Combustion Air-Fuel Technology
Optional Hydrogen Injection
Mach 2 Particle Velocities

SSG-M2 Gaseous Fuel Single Nozzle Series

SSG-M2 Operates on mixture of air with propane, propylene or natural gas Premium coating quality Streamlined, simple, and rugged design Axial powder injection Designed for spraying both cermets and metals 2300-2600 ft/sec (700-800 m/sec) particle velocity Efficient air cooling at 100% duty cycle (no water cooling needed) Up to 50 pounds per hour (22.7 kg/hr) spray rate of carbides Up to 45 pounds per hour (20.4 kg/hr) spray rate of metals Instant start/stop operation Non-clogging nozzles Three nozzle configurations for carbides and metals Low consumption of spare parts Insensitive to operator error Light-weight at 4.2 lb (1.9 kg) Optional hydrogen injection improves coating quality and deposition efficiency

The SSG-M2 effectively sprays cermets, metals and metal alloys, including self-fluxing alloys. It works on a mixture of air with propane, propylene or natural gas. Efficient air cooling eliminates the need for a chilled water supply. The gun can work non-stop for hours without nozzle clogging. The nozzles differ by length. The longest nozzle is used for spraying cermets, while two shorter ones are used for spraying metallic powders. An optional smaller diameter, lowered thrust nozzle is available for manual spraying of cermets. The gun features optional hydrogen injection that boosts the deposition efficiency by 15-20%, and further improves coating quality. The streamlined design simplifies gun use with robotic systems. The powder stream is very narrow, but it can be adjusted by changing the powder injector to correspond to the desired spray spot.